Using a Metered-Dose Inhaler With a Spacer (Adult)

Using a Metered-Dose Inhaler With a Spacer (Adult)

Shake the inhaler and remove its cap: Step 1

Shake the inhaler and remove the inhaler cap. Check the inhaler instructions to see if you need to prime your inhaler before you use it. If it needs priming, follow the instructions on how to prime your inhaler.

Place the mouthpiece into the spacer: Step 2

Place the mouthpiece of the inhaler into the spacer.

Remove the spacer cap: Step 3

Remove the cap from the spacer.

Hold the inhaler upright: Step 4

Hold the inhaler upright with the mouthpiece at the bottom.

Breathe out slowly and completely: Step 5

Tilt your head back slightly and breathe out slowly and completely.

Place the spacer's mouthpiece: Step 6

Place the spacer's mouthpiece in your mouth.

Press down on the inhaler and breathe in: Step 7

Press down on the inhaler to spray one puff of medicine into the spacer and then start breathing in slowly (press first, then breathe in).

Wait for 10 seconds: Step 8

Hold your breath for 10 seconds, to give the medicine time to settle in your lungs.

If you need to take a second dose, wait 30 to 60 seconds to allow the inhaler valve to refill.

Credits

ByHealthwise Staff
Primary Medical ReviewerE. Gregory Thompson, MD - Internal Medicine
Specialist Medical ReviewerKen Y. Yoneda, MD - Pulmonology

Current as ofAugust 21, 2015

WebMD Medical Reference from Healthwise
This information is not intended to replace the advice of a doctor. Healthwise disclaims any liability for the decisions you make based on this information.© 1995-2015 Healthwise, Incorporated. Healthwise, Healthwise for every health decision, and the Healthwise logo are trademarks of Healthwise, Incorporated.